Sulphur supply at a glance
Elemental sulphur is produced in large volumes as a by-product of the oil and gas industry: the hydrogen sulphide removed when sour crude is hydrotreated and sour gas is sweetened is converted to solid sulphur, typically by the Claus process. This recovered sulphur is a high-purity commodity traded worldwide — chemically identical to mined sulphur but a cleaner, refinery-grade material.
As a supplier, 3FB Energy & Trade trades sulphur in the physical forms the market uses: granular and prilled for long-distance dry-bulk trade and storage, crushed lump for regional movements, and bulk and molten cargoes for buyers feeding acid plants directly. The form, grade and delivery terms are matched to the buyer’s handling and end use.
Forms and grades supplied
- Granular sulphur — hard, dust-controlled granules (typically 2–6 mm) formed by granulation; the preferred form for long-haul dry-bulk trade and storage.
- Prilled sulphur — small spherical prills produced by prilling; similar dry-bulk handling to granular.
- Crushed-lump sulphur — broken solid sulphur used chiefly for regional and short-sea movements.
- Bulk and molten sulphur — large dry-bulk parcels in geared bulk carriers, or molten sulphur carried in insulated, heated tankers for buyers with heated handling.
Typical specifications
| Product | Granular, prilled, crushed-lump or molten sulphur |
|---|---|
| Purity (sulphur) | 99.5–99.9% by mass min, per grade |
| Moisture (H₂O) | 0.5% by mass max, per grade |
| Ash | 0.05% by mass max, per grade |
| Acidity (as H₂SO₄) | typically below 0.02% by mass |
| Carbon / organic matter | limited per specification |
| Arsenic, selenium, tellurium | low, per specification |
| Appearance | bright-yellow, free-flowing solid or clear molten liquid |
Indicative typical values shown for orientation only. Exact quality is cargo-dependent and the final contractual specification, as confirmed in the sales agreement and verified by independent inspection, prevails.
Delivery terms — FOB, CIF and CFR
Sulphur is supplied on the Incoterms 2020 basis the buyer prefers. On FOB the buyer nominates the vessel and takes risk at the load port; on CIF and CFR 3FB arranges ocean freight (and, for CIF, cargo insurance) to the agreed discharge port. The choice determines who arranges carriage and insurance and how the price is built up — see FOB versus CIF.
A delivery window is fixed as a laycan, and payment is commonly made under a documentary letter of credit against shipping and quality documents.
Parcel sizes and cargo scale
Internationally traded sulphur moves in a wide range of parcel sizes. Formed sulphur is commonly shipped in Handysize and Supramax dry-bulk parcels — in the order of 30,000 to 60,000 MT for a full cargo, including round lots such as 50,000 MT — while smaller regional, containerised or bagged lots serve buyers who need less. Molten sulphur moves in dedicated heated tankers sized to specialised terminals.
The workable parcel size for any enquiry depends on the load and discharge ports, the vessel and the delivery terms, and is confirmed per cargo. Share your target volume and the desk will advise what is feasible.
Origin and the Middle East
Most internationally traded sulphur is recovered in the world’s refining and sour-gas hubs, and the Middle East is one of the largest producing regions as its gas-processing and refining capacity has grown. 3FB coordinates supply from these regions and ships to demand centres across Europe, Asia, Africa and the Americas, drawing on its network and central trading desk in Istanbul.
Routing, origin and terms are confirmed per cargo and subject to compliance review. See the markets we serve.
Quality and independent inspection
Sulphur is sampled and tested by an independent inspector against the agreed purity, moisture, ash and acidity limits, with a certificate of quality issued at load; quantity is determined by draft survey for bulk parcels or by calibrated heated tanks for molten cargoes. 3FB coordinates this appointment — firms such as SGS and Intertek are referenced only as examples of inspectors active in the trade, not as partners. See inspection.
How to request a sulphur supply indication
To request an indication, state the form (granular, prilled, crushed lump or molten), the required purity, the volume, the delivery terms (FOB, CIF or CFR with the port or terminal), the laycan, the handling type and the payment instrument. The desk reviews feasibility and responds with an indicative offer, subject to confirmation and to KYC and compliance review.
Start at the trading desk.